Adder-technology RC1 Manual de usuario Pagina 43
- Pagina / 48
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
AdderView DVI Installation and Use Page 36
Appendix A. Cable and connector
specifications
IMPORTANT NOTE
The maximum cable lengths supported vary widely between devices and
cables. It may be possible to use cables that are longer than those specified
below with certain PCs and peripherals but this cannot be guaranteed. If you
experience problems try using shorter cables.
A1. Keyboard, monitor and mouse to AdderView DVI
All of the shared devices plug directly into the relevant ports at the rear of the
AdderView DVI. If you use an AT style keyboard you will need an AT (5 pin DIN
female) to PS/2 (6 pin mini-DIN male) converter.
Cable specification (interface-powered operation):
Keyboard and mouse cables should be no longer than 2 metres.
For full DVI video resolution of 1600 x 1200 @ 60Hz, the DVI cable should ideally
not exceed 2 metres. The AdderView DVI will typically drive the following DVI cable
lengths. Greater resolutions may be achievable with some monitors.
Up to 5 metres at a resolutions of 1280 x 1024 @ 60 Hz
Up to 10 metres at a resolutions of 1024 x 768 @ 60 Hz
Cable specification (with optional power adapter):
Keyboard and mouse extension cables can be used to increase the distance from
the AdderView DVI up to 10 metres. Most keyboards and mice will also operate up
to distances of 20 metres. See above for DVI video cable specifications (these don’t
change significantly from the “interface powered” configuration).
A2. AdderView DVI to PCs 1 to 4
Cable specifications:
Video – Single-link DVI-D male-to-male cables of 2 to 10 metres. High quality DVI
cables must be used - low quality cables may lead to visible noise on the display.
For full DVI resolution of 1600 x 1200 @ 60Hz, the cable should ideally not exceed 2
metres.
- VViieeww 1
- Safety information 2
- AdderView DVI GERMAN 3
- QUICK-INSTALLATION 3
- Información sobre seguridad 4
- Consignes de sécurité 5
- AdderView DVI 7
- About this manual 8
- Warranty 9
- Trademarks 9
- Radio Frequency Energy 10
- Contents 11
- Appendices 12
- 1. Introduction 13
- 1.2 Package contents 14
- 1.4 Product information 15
- 2. Installation 16
- 2.3 Connecting your devices 17
- adapter 18
- 2.5 Configuring your PCs 18
- FF followed by 11 NOT ll) 22
- 3. Using the AdderView DVI 28
- 3.3 Status display 29
- 3.4 Keyboard hotkey control 31
- 3.5 Mouse control 32
- 22release 22 33
- 33release 33 33
- ADDERView DVI 35
- B (slave) 35
- A (master) 35
- 4.1 Screen saver time delay 36
- 4.8 Cascade query code 41
- 4.10 Exit configure mode 42
- IMPORTANT NOTE 43
- Recommended cables: 45
- Appendix B. Problem Solving 47
Relacionado con productos y manuales para Hardware Adder-technology RC1
Hardware Adder-technology SV4 Manual de usuario
(34 paginas)
(34 paginas)
Hardware Adder-technology 2XPRO Manual de usuario
(78 paginas)
(78 paginas)
Hardware Adder-technology X50 Manual de usuario
(18 paginas)
(18 paginas)
Hardware Adder-technology AVM208MP Manual de usuario
(80 paginas)
(80 paginas)
Hardware Adder-technology SV4PRO Manual de usuario
(44 paginas)
(44 paginas)
Rockwell Automation 140G-R-SNCx Closing Release manuali
Manuali dei proprietari e guide per l'utente per Apparecchiature Rockwell Automation 140G-R-SNCx Closing Release.
We fornisce 2 manuali pdf Rockwell Automation 140G-R-SNCx Closing Release per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Comentarios a estos manuales